VT26  Multifunction Cryolipolysis lipolaser cavitation RF machine

Cryolipolysis application

Treatments show cryolipolysis process is effective to reduce the stubborn fat and without any harm for

other healthy cells.

Fat layer will be reduced by 20 to 40 percent, additional cryolipolysis procedures can be performed after

one month, resulting in another 20 percent reduction. The results are permanent as the body cannot create

new fat cells.

Often it is used for:

Working handles

1. Cryolipolysis treatment handle is the most important part for the effective fat reduce. With our advanced cooling

technology-Semiconductor ceramic cryo pads, cryolipolysis can create as low as -16C  treatment temperature.

Besides, with medical use silicon, it makes soft enough for the target part, and customer will feel comfortable

during the process.

Currently, here are two sizes of the handles for different areas treatment:

Big handle---for belly, back,  buttock etc.
Mid   handle--- for waist, thigh, etc.
Small handle ---for thigh, arm, crus etc.

Handle design features:

A. Real pressure and temperature sensor

B. Start/ stop button

C. Water circulation sensor on the machine display, if there is any problem of the water circulation,

machine will alarm.

2. That lipolaser uses dual wavelength 660nm and 980nm diode laser, with 6 pads.

Four big lipolaser pads, each 24 diodes, two small pads, each 4 diodes, total 104 diodes. Each pad half

660nm diodes, half 980nm diodes.

3. 40KHz cavitation handle for body, 5MHz tripolar for face and five polar RF for body

Machine features

1. Advanced cooling technology-Semiconductor ceramic cryo pads, cryolipolysis can create as low as -16C

   treatment temperature.

2. 9L water tank, with big radiator and fans for best cooling, ensure the machine keep working without break

    for 12 hours.

3. High quality components with best inner structure design, to reach a high level performance.

4. Japan Mitsubishi diodes ML101J27 inside.

5. Two Cryolipolysis handles and six lipolaser pads working together, for different treatment parts at same time.

Specifications

Cryolipolysis anti freeze membrane

The antifreeze membrane is necessary during the treatment, to protect the skin from frostbiting.

Three sizes for different handles:

Large size: 34*42cm, 110g/ bag, 1pcs/ bag

Middle size: 32*32cm, 110g/ bag, 2pcs/ bag

Small size: 28*28cm, 100g/ bag, 2pcs/ bag