VT19 Cryolipolysis fat freeze laser lipolysis device
Cryolipolysis application
Treatments show cryolipolysis process is effective to reduce the stubborn fat and without any harm for other
healthy cells.
Fat layer will be reduced by 20 to 40 percent,additional cryolipolysis procedures can be performed after one
month, resulting in another 20 percent reduction. The results are permanent as the body cannot create new fat cells.
Often it is used for:
Working handles
1. Cryolipolysis treatment handle is the most important part for the effective fat reduce. With our advanced
cooling technology-Semiconductor ceramic cryo pads, cryolipolysis can create as low as -16C treatment
temperature.
Besides, with medical use silicon, it makes soft enough for the target part, and customer will feel comfortable
during the process.
Currently, here are two sizes of the handles for different areas treatment:
Big handle: treat area ---for belly, back, buttock etc.
Mid handle: treat area --- for waist, thigh, etc.
Small handle: treat area ---for thigh, arm, crus etc.
Large handle
Middle handle
Small handle
Freeze pad size
11*5cm
8*5cm
6*4cm
Treatment size
24*12*9cm
19*8*8cm
12*6*6cm
LED quantity
20pcs
20pcs
12pcs
Packaging size
36*31*16cm
36*31*16cm
36*31*13cm
NW
2.35KG
2.26KG
2KG
Handle design features:
A. Real pressure and temperature sensor
B. Start/ stop button
C. Water circulation sensor on the machine display, if there is any problem of the water circulation, machine
will alarm.
2. That lipolaser uses dual wavelength 660nm and 980nm diode laser, with 6 pads.
Four big lipolaser pads, each 24 diodes, two small pads, each 4 diodes, total 104 diodes. Each pad half 660nm
diodes, half 980nm diodes.
Machine features
1. Two cryo handles work same time, for two target areas or two different clients.
2. Two separate working systems:
Separate air pumps, ensure enough vacuum pressure;
Separate control systems, two handles work independently;
Separate water pumps, each handle with one water pump for effective cooling.
3. 9L water tank, with big radiator and fans for best cooling, ensure the machine keep working without break
for 12 hours.
4. High quality components with best inner structure design, to reach a high level performance.
5. Japan Mitsubishi diodes ML101J27 inside.
6. Two Cryolipolysis handles and six lipolaser pads working together, for different treatment parts at same time.
Specifications
Input voltage |
AC110V/220V 50-60Hz |
Power consumption |
<400w |
Screen |
10.4 inch color touch screen |
Treatment temperature |
5 to -16°C |
Vacuum pressure |
0-110KPa |
Cooling liquid |
pure water |
Default time |
0-60min |
Fuse size |
F3AL250V |
Laser wavelength |
660nm, 980nm |
Laser energy |
130mw-350mw (pulsing) |
Laser pads |
4 big ones, 2 small ones |
Laser type |
Japan diode laser |
Cryolipolysis anti freeze membrane
The antifreeze membrane is necessary during the treatment, to protect the skin from frostbiting.
Three sizes for different handles:
Large size: 34*42cm, 110g/ bag,1pcs/ bag
Middle size: 32*32cm, 110g/ bag, 2pcs/ bag
Small size: 28*28cm, 100g/ bag, 2pcs/ bag